High temperature resistant PVC tape is the main part of the belt conveyor, it is both a loading part and a traction part, mainly used for material loading and traction force transmission. The cost of the conveyor in the conveyor accounts for 30%-50% of the overall cost of the equipment, but it is the part that is relatively easy to wear. Therefore, it is very important to choose a suitable high temperature resistant PVC tape. So, let's learn about the material of high temperature resistant PVC tape!

Patterned PVC tape

The pattern conveyor belt is composed of a belt body and a pattern part. According to the different conveying materials and the size of the inclination of the conveyor belt, the shape and height (shade) of the pattern are required to be different.

The general pattern conveyor varieties are: herringbone pattern conveyor, figure eight pattern conveyor, fishbone pattern conveyor, U-shaped pattern conveyor, cylindrical pattern conveyor, pit pattern conveyor, etc. Or designed according to user requirements, suitable for the transportation of powder, granular and bulk materials with an inclination angle of less than 30 degrees.

Scope and characteristics of high temperature resistant PVC tape: It is widely used in ports, mines, electric power, coal, building materials, concrete and grain and other departments.

Application: It is suitable for the transportation of bulk materials with an inclination angle of less than 30 degrees. Features: Prevent material from falling and improve transportation capacity.

The commonly used high temperature resistant PVC tapes are as follows.

herringbone pattern

Features: The belt surface has a "herringbone"-shaped pattern that is higher than the belt body, and the pattern is open and closed, but each pattern is divided into three types: high, medium and low. It is suitable for conveying powder, granular and small pieces of materials with an inclination angle of 40 degrees, and can also convey bagged materials.

stripe pattern

Features: There are stripes on the belt surface that are higher than the belt body. The patterns are divided into three types: high, medium and low. Each pattern is divided into sparse and dense forms according to the arrangement spacing. Suitable for horizontal transport packaging with a 30-degree inclination angle. If it is a groove, it can replace the human font pattern.

Granular pattern

Features: The belt surface has a granular pattern embedded in the belt body that is higher or concave than the belt body, and the pits can also be made into square hole shape or prismatic and cloth pattern.

Uses: The convex grain pattern is suitable for the transportation of flexible packaging or materials that require gripping force, such as corrugated boxes, or non-slip transportation. The dimple-shaped granular pattern is suitable for conveying granular materials at an inclination angle of 45 degrees.

fan pattern

Features: The belt surface has a semi-fan-shaped pattern. When the tape forms a groove, the pattern is chaotic in a fan shape (or semicircle), which is a high pattern type. It is suitable for conveying powder, granules and bulk materials with a large inclination angle of 60 degrees.

Heat resistant conveyor belt

Heat-resistant conveyor belts are mainly used to transport high-temperature materials such as sinter, hot coke, cement clinker, and hot castings.

According to the main manifestation of the damage of the heat-resistant belt and the loss of working ability, according to the heat-resistant level, EPDM rubber is used as the protective rubber; the high-permeability polyester canvas is used as the strong layer, and the heat-resistant glass cloth is laid between the covering rubber and the skeleton layer. The silicone conveyor greatly improves the heat resistance life. According to the user's requirements, it can be made into an endless belt. rubber conveyor belt

The rubber belt has the characteristics of heat-resistant belt, wear-resistant belt, sintering-resistant belt, oil-resistant belt, alkali-resistant belt, alkali-resistant belt, heat-resistant belt, cold-resistant belt and so on. Mainly used for solid material transportation in various mining, metallurgy, steel, coal, hydropower, building materials, chemical, grain and other enterprises.

Edge high temperature PVC tape

The common barrier conveyor is the high-angle corrugated barrier conveyor. The large-angle corrugated barrier conveyor consists of three parts: base belt, barrier and diaphragm. Plays the role of blocking the edge to prevent the material from slipping. In order to easily bypass the drum, the end of the step is designed to be corrugated; the function of the diaphragm is to accept the material, in order to realize the conveying at a large inclination angle, a t-type TC type is used. The edge and transverse separators are connected with the base tape by the secondary vulcanization method, which has a high connection strength.

Features of high temperature resistant PVC tape - silicone

1. Food grade, this feature is one of the important reasons for the use of the food industry;

2. High temperature resistance, conventional silicone rubber belts can withstand high temperatures of 100-500 degrees, and the chemical properties are stable;

3. Prevent sticking, high temperature resistant silicone with non-stick sugar, chocolate and other foods with high sugar content.

High temperature resistant PVC tape is an industrial belt made of silica gel. It has the characteristics of high temperature resistance, so it is also called high temperature resistant silicone tape. It has high adsorption performance, good thermal stability, stable chemical properties, and high mechanical strength. Widely used in electronics, automotive, food and other industries.

The above is what the high temperature resistant PVC tape is made of. If you want to know more, please feel free to contact us!